Ryobi 18v P714 Hand Vac User Manual

The Ryobi One+ Range. The Ryobi One+ Handheld Vacuum shares common features with the rest of the One+ range such as the oversized soft grip and interchangeable batteries. The soft grip coupled with ideal weight distribution means that the Hand Vac is comfortable to hold and use over extended periods of. Ryobi P710 Vacuum Cleaner User Manual. Of 16 SAVE THIS MANUAL FOR FUTURE REFERENCE. Your TUFF SUCKER™ Wet/Dry Vacuum has been engineered and manufactured to Ryobi’s high standard for dependability, ease. Of operation, and operator safety. When properly cared for, it will give you years of rugged, trouble-free performance. View and Download Ryobi P714 operator's manual online. 18 VOLT DRY HAND VAC. P714 Vacuum Cleaner pdf manual download. Risk of injury, the user must read. Understand the operator's manual. Before using this product. SAVE THIS MANUAL FOR.

Ryobi

Student-Contributed Wiki

An awesome team of students from our education program made this wiki.

Battery powered hand held vacuum.

Vacuum losing suction

When the vacuum is powered on, the vacuum has no or a weak suction.

Vacuum is properly attached

Before any other things may be looked into, make sure your vacuum is properly put together. Refer to our replacement guide for instructions on how to put the vacuum together. If the nose of the vacuum is not attached properly it can cause poor suction.

Full Filter / Vacuum Contents

If your vacuum is at it’s maximum capacity for what it can hold the suction of the vacuum will be compromised. If your vacuum is full, simply take the nose off of the vacuum by following our replacement guide, then looking at the filter to see if it is clogged. You will be able to tell if there is a lot of dirt on the filter, if so, it is clogged.

Vacuum gets hot

When you run the vacuum the motor heats up more than usual. The body of the vacuum is seemingly hot.

Ryobi 18 Volt Hand Vac

Clogged filter

It is possible that if your filter is clogged on your vacuum that it won’t get enough air flow for the vacuum’s motor work properly. If your filter is clogged you simply need to detach the nose of the vacuum and you will be able to see the filter at the end of the nose. If it is clogged simply pull the dirt out or hit it against a trashcan and the majority of what is clogging your filter will come off of the filter.

Bad belt

Vacuums have belts that drive the motor. If the belt on your vacuum is going bad or is bad, it will often cause the vacuum’s motor to overheat. You can see in our replacement guide how to replace the motor itself. Look at the replacement guide to see how to get to the motor, and then you will see the black belt. If the belt looks compromised you may need to replace it.

Vacuum won't turn on

The vacuum won’t respond or show any signal of powering up no matter what you do.

Wrong installment of the battery pack

Before turning on the switch, make sure you have installed the battery pack properly. You can follow this guide

Faulty battery pack

If the battery don’t have energy even though it has been charged properly (the red light on the charging assembly is on). Consider replace the battery pack.

Bad motor

If your battery is charged properly but the vacuum still cannot run, it is possible that the motor in the vacuum is broken. You can replace the motor using this guide.

Battery won’t charge

The red light on charging assembly won’t turn on while charging.

Faulty charging assembly

If the red light on the charging assembly cannot turn on even though you have connected the battery pack onto the charging assembly properly, it is possible that the charging assembly is broken. Consider purchasing a replacement charge assembly.

Wrong charging rate

Check out whether your plug base’s voltage is 120V. The higher voltage may do damage to your charge assembly or battery pack and the lower voltage may not be able to charge the battery.

Ryobi P714 Filter

Burnt Plastic Smell

When the vacuum is powered on it starts to smell like burnt plastic.

Clogged Filter

If the filter is clogged it will restrict air from getting to the motor, which is important for cooling (a motor that gets too hot can start to melt surrounding plastic and produce a bad smell). If your vacuum is full, simply take the nose off of the vacuum by following our replacement guide, then looking at the filter to see if it is clogged. Follow our filter cleaning guide here.

Bad Belt

Vacuums have belts that drive the motor. If the belt on your vacuum is going bad or is bad, it will often cause the vacuum’s motor to overheat (overheating leads to melted plastics which produces a bad smell). You can see in our replacement guide how to replace the motor itself. Look at the replacement guide to see how to get to the motor, and then you will see the black belt. If the belt looks compromised you may need to replace it.

Ryobi P714 Vacuum Tool Only

Bad Motor

Ryobi P714 Parts

If the smell persists, the motor itself might need replaced. If either of the previous issues do not fix the problem then follow the motor replacement guide here.