- Siemens Gigaset 8825
- Siemens Gigaset 8825 User Guide
- Siemens Gigaset Phone
- Siemens Gigaset 2025c Manual
Gigaset 8800 Quick Start Guide
This guide will help you get started using your Gigaset handset. For additional information related to your Gigaset 8825 system, please refer to the User Manual.
Welcome to the support resource for your Gigaset C385. On this page you will find answers to frequently asked questions. Manuals as well as software and firmware are available for download. You will also find video tutorials, which will help you to get started. Should your device have a defect, you can register your Gigaset C385 for repair. View and Download Siemens SIMATIC NET CP 343-1 instruction manual online.
Connecting the Charger
A charger is included with handsets.This charger does not require connection to a telephone line for operation. Use only the power supply (110 VAC/60 Hz with cord) included with the charger. (Do not use other power supplies.)
Before using your charger, follow these steps:
1Insert small plug on cord into back of charger.
2Turn small plug to the left and place cord in cable channel on bottom of charger.
Back of
Charger
3Insert power supply into wall outlet.
May be wall mounted | Bottom of |
Charger | |
using two small | |
screws (not provided) |
IMPORTANT: Do not use a wall outlet controlled by a wall switch.
Customer Care: 1-888-777-0211
Or visit our Website: www.icm.siemens.com
Visite nuestro sitio Web para obtener instrucciones en español.
Gigaset 8800 Handset
The Gigaset 8800 handset is used exclusively on the Gigaset 8825 system. Up to a total of eight handsets may be added.
Handset Setup | |
Before using your handset, follow these steps: | |
2 Insert batteries | 3 Place cover on back |
as shown. | |
of handset and push | |
gently upward until it | |
– | clicks into place. |
+ | |
+ –
IMPORTANT: Charge batteries 12 to 14 hours before using the handset for the first time. WARNING: Use only NiCd or NiMh “AA” rechargeable batteries. DO NOT USE ALKALINE, LITHIUM, OR NON-RECHARGEABLE BATTERIES.
Cordless Handset Registration
The cordless handset that comes with the system is preregistered to the base station. Additional cordless handsets need to be registered to the base station.
1 If the handset is not already on, press PWR key in the lower right corner of handset.
2 When “Please Register” is displayed, press OK. 3 Enter System PIN and press OK (default is 0000). 4 At base station, press MENU.
5 Scroll to “System Settings” by pressing >FWD key and then press SELECT.
6 Enter System PIN and press SELECT (default is 0000).
7 Scroll to “Mobile Registration” by pressing >FWD key and then press SELECT.
8 When “Select Intercom Number“ is displayed on handset, scroll to number you want to assign, and press OK.
9 When completed, you will hear a confirmation beep.
See User Manual for additional options.
Customer Care: 1-888-777-0211
Or visit our Website: www.icm.siemens.com
Visite nuestro sitio Web para obtener instrucciones en español.
Your handset is now registered and ready for use.
Talk key
-accept call -dial number
Menu key
Speakerphone key
Switch from handset to handsfree talking
Conference key connect to another call
Headset Jack
Keypad
Charge status
Ýbattery empty Übattery 1/3 full Ûbattery 2/3 full
Úbattery fully charged battery flashing when low
Soft keys
use for access to the functions shown in display
End key
-end call -cancel function
-return to idle status (hold down)
Intercom key internal calls
Power key
Press the soft keys above the screen in this example is one of press the corresponding side of
0(18 | key to navigate through the handset options.The |
many screens you will see on your handset. Always the left or right soft key to activate the function shown
in the display.
At the Handset:
Press the LEFT side | |
of the LEFT soft key | |
to scroll up. | ↕ |
Left | |
Soft Key |
Press the RIGHT side of the
LEFT soft key to scroll down.
Î
↕
Press the RIGHT | |
side of the RIGHT | |
soft key to select | |
↕ | (OK). |
Right
Soft Key
Press the LEFT side of the
RIGHT soft key to return.
Customer Care: 1-888-777-0211
Or visit our Website: www.icm.siemens.com
Visite nuestro sitio Web para obtener instrucciones en español.
BASIC HANDSET OPERATION
Making a Call | 1 | Dial desired number. | |
2 | Press cor 63.5 | speakerphone key. | |
3 | Press aor place handset in base or charger to | ||
hang up. | |||
Answering Call | 1 | Lift handset from charger. | |
2 | Or, press cor | 63.5 speakerphone key. | |
Intercom Call | 1 | Press INT and select handset’s intercom number or | |
“0” for (desk) base station. | |||
2 | Or, select DSK for (desk) base station in display. | ||
3 | Or, select ALL to call base and all handsets. | ||
Setting Volume | 1 | Press MENU. | |
(Handset Earpiece) | 2 | Scroll to “MOBILE SETTINGS” and press OK. | |
3 | Select “HANDSET VOLUME” and press OK. | ||
4 | Select volume level by pressing >or<on left | ||
soft key and press OK. | |||
Setting Volume | 1 | Press MENU. | |
(Handset Speakerphone) | 2 | Scroll to “MOBILE SETTINGS” and press OK. | |
3 | Select “HANDSFREE VOL” and press OK. | ||
4 | Select volume level by pressing >or<on left | ||
soft key and press OK. | |||
Setting Language 1 | Press MENU. | ||
2 | Scroll to “MOBILE SETTINGS” and press OK. | ||
3 | Scroll to “LOCAL SETTINGS” and press OK. | ||
4 | Scroll to “LANGUAGE” and press OK. | ||
5 | Select the desired language and press OK. A check | ||
mark appears next to the selected language. | |||
FCC Information
This telephone system equipment has been tested and found to comply with the limits for Class B digital device, pursuant to Part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1)This device may not cause harmful interference, and
(2)This device must accept any interference received, including interference that may cause undesired operation.
These limits are designed to provide reasonable protection against harmful interference in a residential installation. Some cordless telephones operate at frequencies that may cause interference to nearby TVs and VCRs.To minimize or prevent such interference, the system base should NOT be placed near or on top of aTV orVCR; and, if interference is experienced, moving the base farther away from theTV or VCR will often reduce or eliminate the interference.
However, there is no guarantee that interference will not occur in a particular installation. If this telephone system does cause harmful interference to radio or television reception, which can be determined by turning the system off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
(1)Increase the separation between the base station and receiver;
(2)Connect the base station to an outlet on a circuit different from that to which the receiver is connected;
(3)Consult the dealer or an experienced radio TV technician for help.
Notice to Hearing Aid Wearers:This phone system is compatible with inductively coupled hearing aids.
Siemens Gigaset 8825
Power Outage: In the event of a power outage, your cordless telephone will not operate.The cordless telephone requires electricity for operation.You should have a telephone that does not require electricity available for use during power outages.
Safety Precautions: Before using your telephone equipment, basic safety instructions should always be followed to reduce the risk of fire, electric shock, and injury to persons. Contains Nickel-Metal Hydride Batteries. Battery must be recycled or disposed of properly. Do not dispose in municipal waste. Only use type AA Nickel-Cadmium (NiCd) or type AA Nickel-Metal Hydride (NiMH) rechargeable batteries in the cordless handset. Do not use Alkaline or lithium batteries in the cordless handset or charger. Do not mix old and new batteries. Use the same rechargeable battery type. Do not combine rechargeable battery types. Exercise care in handling batteries in order not to short the batteries with conducting materials such as rings, bracelets, and keys.The batteries or conduction materials may overheat and cause burns or fire. Do not dispose batteries in fire. For additional instructions, see the user’s manual included with your Gigaset 8825 system.
The installation of the base unit should allow at least 8-inches between the base and persons to be in compliance with FCC RF exposure guidelines.
Warranty: The product warranty is contained in the user’s manual. Please refer to the manual for complete product warranty details.
Information subject to change as Siemens reserves the right, without notice, to make changes in equipment design or components. Siemens is a registered trademark and Gigaset is a trademark of Siemens AG.
Made in Germany. © Siemens Information and Communication Mobile, LLC 2001 Copyright. All rights reserved.
A31008-G4035-U102-1-7619
Customer Care: 1-888-777-0211
Or visit our Website: www.icm.siemens.com
Visite nuestro sitio Web para obtener instrucciones en español.
DO NOT RETURN
THIS PRODUCT TO THE STORE!
Please read the following important information.
For Siemens Customer Care, product operation information, or for technical information, call our experts toll-free
1-888-777-0211
7 a.m. to 10 p.m. Central StandardTime EVERY DAY
Siemens Gigaset 8825 User Guide
www.icm.siemens.com
Visite nuestro sitio Web para obtener instrucciones en español.